Meshimi

Add LoRa mesh radio to a Flipper Zero.

Flipper Zero add-onMeshtasticLoRaWANOpen hardware

Availability: Unconfirmed
Design: Open
Radio: Seeed Wio-SX1262 LoRa

Compare with similar devices

The maker publishes this as a project, not a product listing.

Radio equipment needs certification where you live (FCC, CE, UKCA, ISED, Anatel). Some devices are uncertified or restricted in Brazil. Buyers are responsible for their local law.

Bring along: A Flipper Zero and a LoRa antenna for your region.
Keep in mind: Only a demo Flipper app is published; flashing steps are unfinished.

Source checked · Sep 16, 2026

Image credit
Maker photo: Meshimi on a Flipper Zero with its LoRa antenna · BegoonLab

(02) Blueprint

Build it yourself

Open hardware

Complete KiCad project (schematic, PCB, gerbers, BOM) plus mechanical STEP models for the PCB and both enclosure variants are published under GPL-3.0.

Meshimi v1.0 schematic (KiCad)

Read straight from the maker’s repository. Open on GitHub

Meshimi v1.0 schematic (KiCad)

GitHub

Design files 5

Source 1

alexbegoon/meshimihardwareGPL-3.024

git clone https://github.com/alexbegoon/meshimi.git

Key parts 3

Seeed XIAO ESP32-C6 All ESP32-C6 devicesMCU / Wi-Fi/BLE/802.15.4Datasheet
Seeed Wio-SX1262 module (SX1262 LoRa radio)All SX1262 devicesLoRa radioDatasheet
MAX17261 All MAX17048 / MAX17261 devicesfuel gauge / powerDatasheet

Research notes

Verified via gh api tree on alexbegoon/meshimi (GPL-3.0, 24 stars). The 'BegoonLab/meshimi' link in the batch does not resolve to a distinct repo (org page only) — the real repo lives under alexbegoon/meshimi.

Every link checked 2026-09-27.

Hand this device to your agent. Everything on this page, as clean Markdown and JSON: specs, shops, prices, design files, parts.

Markdown JSON

Made the Meshimi? Put the badge on your README; it links here, with every shop that sells it.

Specifications

Hardware

Controller: Seeed XIAO ESP32-C6 module (Wi-Fi 6, Bluetooth LE)
LoRa radio: Seeed Wio-SX1262 module, wired over SPI with BUSY, DIO1, reset and RF-switch lines
Alternate controller footprint: The v1.0 schematic also includes a XIAO ESP32-S3 footprint
Battery monitoring: MAX17261 fuel gauge on I²C with +BATT / −BATT battery input
Regulator: XC6206 3.3 V regulator
PCB: Four-layer board; KiCad project, Gerbers and BOM are published

Flipper Zero connection

Fit: Plugs into the Flipper Zero GPIO header
Signals used: 5 V, UART TX/RX, I²C, and PA13 / PA14 / PB14 lines, plus DTR/RTS for flashing control
Flipper app: A demo app with connect, configuration and about screens; it talks to the module with protobuf messages

Protocols named by the maker

Supported list: Meshtastic, LoRaWAN, Wi-Fi 6 and Bluetooth

Enclosure

Built-in antenna case: 3D-printable case for an internal antenna; STEP file published
External antenna case: 3D-printable case with an SMA connector; STEP file published
Assembly: Brass heat-set inserts and screws hold the module

Compliance and licence

Radio certification: Relies on pre-certified Seeed modules; CE, FCC, TELEC, UK and RoHS documents for both modules are in the repository
Licence: GPL-3.0

What still needs checking

Kickstarter status, price, delivery dates and what a reward includes were not checked; the campaign page blocks automated reads.
The maker page at begoonlab.tech did not respond during this review.
The README lists a firmware folder, but none is published. The guide’s flashing instructions are marked unfinished.
LoRa frequency band options, battery type, connector and capacity, dimensions and weight are not stated.
Matter and Thread appear in the repository description only; no supporting firmware was found.

Downloads & docs

Maker repositorygithub.com README at the reviewed commitgithub.com v1.0 schematicgithub.com v1.0 hardware files, Gerbers and BOMgithub.com Flipper Zero user guidegithub.com Enclosure guidegithub.com Flipper Zero demo app sourcegithub.com Module certification documentsgithub.com Licencegithub.com Earlier BegoonLab repositorygithub.com

Source & revision notes

Maker listing checked Sep 16, 2026. Detailed documentation reviewed Sep 16, 2026. Not hands-on tested.

Specifications were read from the maker’s README and the v1.0 KiCad schematic at commit 5ff7c36 (July 2025).

The README links a Kickstarter campaign. Its current state, pricing and delivery could not be checked, so availability is shown as unconfirmed.

The repository description also names Matter and Thread. The README lists Meshtastic, LoRaWAN, Wi-Fi 6 and Bluetooth; no Matter or Thread firmware is published.

Reviewed at commit 5ff7c36bc2b53246a46fb35a0e163899b55bb3f2, last pushed 2025-07-23. Facts marked as schematic readings come from component values and net names, not from maker prose.

Build or list hardware with us