{
 "schemaVersion": 1,
 "slug": "raspberry-pi-5",
 "name": "Raspberry Pi 5",
 "maker": "Raspberry Pi",
 "category": "computers",
 "capabilities": [
  "wifi5",
  "ble",
  "wifi"
 ],
 "chips": [
  "bcm2712"
 ],
 "page": "https://gadgets.sh/diy/raspberry-pi-5/",
 "cataloguePage": "https://gadgets.sh/devices/raspberry-pi-5/",
 "checked": "2026-09-27",
 "state": "partial",
 "stateLabel": "Partial build sources",
 "sourceType": "community-published",
 "revision": null,
 "reproduction": {
  "status": "not-tested",
  "note": "We have not built and tested a reproduction from these files."
 },
 "hardwareLicense": null,
 "evidence": [
  {
   "key": "schematic",
   "label": "Editable schematic",
   "status": "present",
   "fileIds": [
    "Knio/rpi5re/rpi5re/rpi5re.kicad_sch"
   ],
   "note": "Published source present; inspect revision and completeness before building."
  },
  {
   "key": "pcb",
   "label": "Editable PCB",
   "status": "present",
   "fileIds": [
    "Knio/rpi5re/rpi5re/rpi5re.kicad_pcb"
   ],
   "note": "Published source present; inspect revision and completeness before building."
  },
  {
   "key": "bom",
   "label": "Bill of materials",
   "status": "not-found",
   "fileIds": [],
   "note": "A complete bill of materials has not been verified; the catalogue chip list is not a BOM."
  },
  {
   "key": "gerbers",
   "label": "Fabrication files",
   "status": "not-found",
   "fileIds": [],
   "note": "Ready-to-manufacture Gerbers and drill files have not been verified."
  },
  {
   "key": "enclosure",
   "label": "Enclosure",
   "status": "not-found",
   "fileIds": [],
   "note": "A complete matching enclosure design has not been verified."
  },
  {
   "key": "firmware",
   "label": "Firmware source",
   "status": "not-found",
   "fileIds": [],
   "note": "Firmware source and flashing instructions need review."
  },
  {
   "key": "instructions",
   "label": "Build instructions",
   "status": "partial",
   "fileIds": [
    "https://pip.raspberrypi.com/documents/RP-008347-DS"
   ],
   "note": "Assembly and test instructions have not been reviewed."
  }
 ],
 "missing": [
  {
   "key": "bom",
   "note": "A complete bill of materials has not been verified; the catalogue chip list is not a BOM."
  },
  {
   "key": "gerbers",
   "note": "Ready-to-manufacture Gerbers and drill files have not been verified."
  },
  {
   "key": "enclosure",
   "note": "A complete matching enclosure design has not been verified."
  },
  {
   "key": "firmware",
   "note": "Firmware source and flashing instructions need review."
  },
  {
   "key": "instructions",
   "note": "Assembly and test instructions have not been reviewed."
  },
  {
   "key": "license",
   "note": "Hardware-specific licence scope has not been reviewed. A firmware or repository licence alone does not establish it."
  },
  {
   "key": "revision",
   "note": "Compatibility between board, enclosure and firmware revisions has not been reviewed."
  }
 ],
 "files": [
  {
   "id": "Knio/rpi5re/rpi5re/rpi5re.kicad_sch",
   "path": "rpi5re/rpi5re.kicad_sch",
   "label": "rpi5re.kicad_sch",
   "kind": "schematic",
   "format": "KiCad",
   "source": "https://github.com/Knio/rpi5re/blob/df64eebb1b76130b28cdea881e8d992daa4067f5/rpi5re/rpi5re.kicad_sch",
   "download": "https://raw.githubusercontent.com/Knio/rpi5re/df64eebb1b76130b28cdea881e8d992daa4067f5/rpi5re/rpi5re.kicad_sch",
   "repository": "https://github.com/Knio/rpi5re",
   "revision": "df64eebb1b76130b28cdea881e8d992daa4067f5",
   "bytes": 3260967,
   "gitBlobSha1": "af527db2a5bd76bf9bdeb41e709cb0d89f5bcdb3",
   "licenseFiles": []
  },
  {
   "id": "Knio/rpi5re/rpi5re/rpi5re.kicad_pcb",
   "path": "rpi5re/rpi5re.kicad_pcb",
   "label": "rpi5re.kicad_pcb",
   "kind": "pcb",
   "format": "KiCad",
   "source": "https://github.com/Knio/rpi5re/blob/df64eebb1b76130b28cdea881e8d992daa4067f5/rpi5re/rpi5re.kicad_pcb",
   "download": "https://raw.githubusercontent.com/Knio/rpi5re/df64eebb1b76130b28cdea881e8d992daa4067f5/rpi5re/rpi5re.kicad_pcb",
   "repository": "https://github.com/Knio/rpi5re",
   "revision": "df64eebb1b76130b28cdea881e8d992daa4067f5",
   "bytes": 78,
   "gitBlobSha1": "c547853d1022cf34a8c228a9eda727e53adc422b",
   "licenseFiles": []
  },
  {
   "id": "Knio/rpi5re/rpi5re/New_Library.kicad_sym",
   "path": "rpi5re/New_Library.kicad_sym",
   "label": "New_Library.kicad_sym",
   "kind": "library",
   "format": "KiCad",
   "source": "https://github.com/Knio/rpi5re/blob/df64eebb1b76130b28cdea881e8d992daa4067f5/rpi5re/New_Library.kicad_sym",
   "download": "https://raw.githubusercontent.com/Knio/rpi5re/df64eebb1b76130b28cdea881e8d992daa4067f5/rpi5re/New_Library.kicad_sym",
   "repository": "https://github.com/Knio/rpi5re",
   "revision": "df64eebb1b76130b28cdea881e8d992daa4067f5",
   "bytes": 10467,
   "gitBlobSha1": "f7abf6c60cc9210ee8bd1ed1c06e6c895469135c",
   "licenseFiles": []
  },
  {
   "id": "Knio/rpi5re/rpi5re/sym-lib-table",
   "path": "rpi5re/sym-lib-table",
   "label": "sym-lib-table",
   "kind": "library",
   "format": "RPI5RE/SYM-LIB-TABLE",
   "source": "https://github.com/Knio/rpi5re/blob/df64eebb1b76130b28cdea881e8d992daa4067f5/rpi5re/sym-lib-table",
   "download": "https://raw.githubusercontent.com/Knio/rpi5re/df64eebb1b76130b28cdea881e8d992daa4067f5/rpi5re/sym-lib-table",
   "repository": "https://github.com/Knio/rpi5re",
   "revision": "df64eebb1b76130b28cdea881e8d992daa4067f5",
   "bytes": 141,
   "gitBlobSha1": "2e86d023ec828230d48afea592f9dabab12cfe5b",
   "licenseFiles": []
  },
  {
   "id": "https://pip.raspberrypi.com/documents/RP-008347-DS",
   "label": "Mechanical drawing (PDF)",
   "kind": "manual",
   "format": "PDF",
   "source": "https://pip.raspberrypi.com/documents/RP-008347-DS",
   "download": null,
   "repository": null,
   "revision": null,
   "bytes": null,
   "gitBlobSha1": null,
   "licenseFiles": []
  },
  {
   "id": "Knio/rpi5re/rpi5re/rpi5re.kicad_pro",
   "path": "rpi5re/rpi5re.kicad_pro",
   "label": "rpi5re project",
   "kind": "other",
   "format": "KiCad",
   "source": "https://github.com/Knio/rpi5re/blob/df64eebb1b76130b28cdea881e8d992daa4067f5/rpi5re/rpi5re.kicad_pro",
   "download": "https://raw.githubusercontent.com/Knio/rpi5re/df64eebb1b76130b28cdea881e8d992daa4067f5/rpi5re/rpi5re.kicad_pro",
   "repository": "https://github.com/Knio/rpi5re",
   "revision": "df64eebb1b76130b28cdea881e8d992daa4067f5",
   "bytes": 8310,
   "gitBlobSha1": "f88cd5835baafd35d1d0657eef1d0d35b9d9a903",
   "licenseFiles": []
  }
 ],
 "repositories": [
  {
   "url": "https://github.com/Knio/rpi5re",
   "role": "hardware",
   "official": false,
   "commit": "df64eebb1b76130b28cdea881e8d992daa4067f5",
   "branch": "master",
   "checked": "2026-09-30",
   "archive": "https://github.com/Knio/rpi5re/archive/df64eebb1b76130b28cdea881e8d992daa4067f5.zip",
   "repositoryLicense": null,
   "licenseFiles": [],
   "submodules": [],
   "inventoryNote": "Design files, source-application project files, CAD libraries, docs, BOMs and firmware images; full source code is in the repository archive."
  }
 ],
 "selection": "Catalogue-linked files and nearby design dependencies. The paths may cover multiple revisions; compatibility has not been established.",
 "reviewed": null,
 "notes": [],
 "counts": {
  "files": 6,
  "downloadable": 5,
  "pinned": 5,
  "repositories": 1
 },
 "downloads": {
  "manifest": "https://gadgets.sh/diy/raspberry-pi-5/manifest.json",
  "brief": "https://gadgets.sh/diy/raspberry-pi-5/build-brief.md",
  "pack": null,
  "archives": [
   {
    "repository": "https://github.com/Knio/rpi5re",
    "revision": "df64eebb1b76130b28cdea881e8d992daa4067f5",
    "url": "https://github.com/Knio/rpi5re/archive/df64eebb1b76130b28cdea881e8d992daa4067f5.zip",
    "includes": "Full repository snapshot; may include other device revisions.",
    "submodules": []
   }
  ]
 },
 "nextSteps": [
  "Read the source licences and revision notes; preserve upstream attribution.",
  "Download the pinned design files or repository archives and resolve external libraries, submodules and large-file pointers.",
  "Inspect the circuit, PCB, BOM, enclosure and firmware together; resolve the listed gaps before ordering parts or fabrication.",
  "Follow the upstream assembly and programming instructions. Record changes and bench-test the resulting hardware."
 ]
}