{
 "schemaVersion": 1,
 "slug": "meowkit",
 "name": "MeowKit",
 "maker": "whitecliff / MeowKit",
 "category": "multitools",
 "capabilities": [
  "ble",
  "wifi"
 ],
 "chips": [
  "esp32-s3",
  "st7789",
  "axp173",
  "bmi270",
  "pcf8563",
  "es8311"
 ],
 "page": "https://gadgets.sh/diy/meowkit/",
 "cataloguePage": "https://gadgets.sh/devices/meowkit/",
 "checked": "2026-09-27",
 "state": "reference",
 "stateLabel": "Reference material",
 "sourceType": "maker-published",
 "revision": null,
 "reproduction": {
  "status": "not-tested",
  "note": "We have not built and tested a reproduction from these files."
 },
 "hardwareLicense": null,
 "evidence": [
  {
   "key": "schematic",
   "label": "Editable schematic",
   "status": "partial",
   "fileIds": [
    "https://docs.meowkit.cc/schematics"
   ],
   "note": "Editable circuit schematic not verified."
  },
  {
   "key": "pcb",
   "label": "Editable PCB",
   "status": "not-found",
   "fileIds": [],
   "note": "Editable PCB layout not verified."
  },
  {
   "key": "bom",
   "label": "Bill of materials",
   "status": "not-found",
   "fileIds": [],
   "note": "A complete bill of materials has not been verified; the catalogue chip list is not a BOM."
  },
  {
   "key": "gerbers",
   "label": "Fabrication files",
   "status": "not-found",
   "fileIds": [],
   "note": "Ready-to-manufacture Gerbers and drill files have not been verified."
  },
  {
   "key": "enclosure",
   "label": "Enclosure",
   "status": "not-found",
   "fileIds": [],
   "note": "A complete matching enclosure design has not been verified."
  },
  {
   "key": "firmware",
   "label": "Firmware source",
   "status": "present",
   "fileIds": [
    "https://github.com/mingolucky/meowkit-s3-firmware"
   ],
   "note": "Published source present; inspect revision and completeness before building."
  },
  {
   "key": "instructions",
   "label": "Build instructions",
   "status": "partial",
   "fileIds": [
    "https://docs.meowkit.cc/tech-specs"
   ],
   "note": "Assembly and test instructions have not been reviewed."
  }
 ],
 "missing": [
  {
   "key": "schematic",
   "note": "Editable circuit schematic not verified."
  },
  {
   "key": "pcb",
   "note": "Editable PCB layout not verified."
  },
  {
   "key": "bom",
   "note": "A complete bill of materials has not been verified; the catalogue chip list is not a BOM."
  },
  {
   "key": "gerbers",
   "note": "Ready-to-manufacture Gerbers and drill files have not been verified."
  },
  {
   "key": "enclosure",
   "note": "A complete matching enclosure design has not been verified."
  },
  {
   "key": "instructions",
   "note": "Assembly and test instructions have not been reviewed."
  },
  {
   "key": "license",
   "note": "Hardware-specific licence scope has not been reviewed. A firmware or repository licence alone does not establish it."
  },
  {
   "key": "revision",
   "note": "Compatibility between board, enclosure and firmware revisions has not been reviewed."
  }
 ],
 "files": [
  {
   "id": "https://docs.meowkit.cc/schematics",
   "label": "Per-block schematic diagrams (Power, MCU, Display, Audio, RTC, GPIO, NFC, etc.)",
   "kind": "schematic",
   "format": "HTML",
   "source": "https://docs.meowkit.cc/schematics",
   "download": null,
   "repository": null,
   "revision": null,
   "bytes": null,
   "gitBlobSha1": null,
   "licenseFiles": []
  },
  {
   "id": "https://docs.meowkit.cc/tech-specs",
   "label": "Technical specifications",
   "kind": "manual",
   "format": "HTML",
   "source": "https://docs.meowkit.cc/tech-specs",
   "download": null,
   "repository": null,
   "revision": null,
   "bytes": null,
   "gitBlobSha1": null,
   "licenseFiles": []
  }
 ],
 "repositories": [
  {
   "url": "https://github.com/mingolucky/meowkit-s3-firmware",
   "role": "firmware",
   "official": true,
   "commit": "2f14a430295279c0dd5a98d160dd40bd75f13a41",
   "branch": "main",
   "checked": "2026-09-30",
   "archive": "https://github.com/mingolucky/meowkit-s3-firmware/archive/2f14a430295279c0dd5a98d160dd40bd75f13a41.zip",
   "repositoryLicense": null,
   "licenseFiles": [
    "https://github.com/mingolucky/meowkit-s3-firmware/blob/2f14a430295279c0dd5a98d160dd40bd75f13a41/lib/AnimatedGIF-2.2.0/LICENSE",
    "https://github.com/mingolucky/meowkit-s3-firmware/blob/2f14a430295279c0dd5a98d160dd40bd75f13a41/lib/AnimatedGIF-2.2.0/examples/ESP32-LGFX-SDCard-GifPlayer/SD_Content/LICENSE.txt",
    "https://github.com/mingolucky/meowkit-s3-firmware/blob/2f14a430295279c0dd5a98d160dd40bd75f13a41/lib/ESP32-audioI2S/LICENSE",
    "https://github.com/mingolucky/meowkit-s3-firmware/blob/2f14a430295279c0dd5a98d160dd40bd75f13a41/lib/IRremoteESP8266/LICENSE.txt",
    "https://github.com/mingolucky/meowkit-s3-firmware/blob/2f14a430295279c0dd5a98d160dd40bd75f13a41/lib/LovyanGFX/license.txt",
    "https://github.com/mingolucky/meowkit-s3-firmware/blob/2f14a430295279c0dd5a98d160dd40bd75f13a41/lib/LovyanGFX/src/lgfx/Fonts/GFXFF/license.txt",
    "https://github.com/mingolucky/meowkit-s3-firmware/blob/2f14a430295279c0dd5a98d160dd40bd75f13a41/lib/LovyanGFX/src/lgfx/Fonts/efont/COPYRIGHT.txt",
    "https://github.com/mingolucky/meowkit-s3-firmware/blob/2f14a430295279c0dd5a98d160dd40bd75f13a41/lib/arduinoFFT/LICENSE",
    "https://github.com/mingolucky/meowkit-s3-firmware/blob/2f14a430295279c0dd5a98d160dd40bd75f13a41/lib/lvgl/LICENCE.txt",
    "https://github.com/mingolucky/meowkit-s3-firmware/blob/2f14a430295279c0dd5a98d160dd40bd75f13a41/lib/mooncake/LICENSE",
    "https://github.com/mingolucky/meowkit-s3-firmware/blob/2f14a430295279c0dd5a98d160dd40bd75f13a41/software/HardwareSerialMonitor/source/HardwareSerialMonitor/LICENSE.txt",
    "https://github.com/mingolucky/meowkit-s3-firmware/blob/2f14a430295279c0dd5a98d160dd40bd75f13a41/software/HardwareSerialMonitor/source/LICENSE.txt"
   ],
   "submodules": [],
   "inventoryNote": "Design files, source-application project files, CAD libraries, docs, BOMs and firmware images; full source code is in the repository archive."
  },
  {
   "url": "https://github.com/mingolucky/meowkit-s3-docs",
   "role": "docs",
   "official": true,
   "commit": "b96f6f213bc021a27ccdb6a6514fa576bec7288f",
   "branch": "main",
   "checked": "2026-09-30",
   "archive": "https://github.com/mingolucky/meowkit-s3-docs/archive/b96f6f213bc021a27ccdb6a6514fa576bec7288f.zip",
   "repositoryLicense": null,
   "licenseFiles": [],
   "submodules": [],
   "inventoryNote": "Design files, source-application project files, CAD libraries, docs, BOMs and firmware images; full source code is in the repository archive."
  }
 ],
 "selection": "Catalogue-linked files and nearby design dependencies. The paths may cover multiple revisions; compatibility has not been established.",
 "reviewed": null,
 "notes": [],
 "counts": {
  "files": 2,
  "downloadable": 0,
  "pinned": 0,
  "repositories": 2
 },
 "downloads": {
  "manifest": "https://gadgets.sh/diy/meowkit/manifest.json",
  "brief": "https://gadgets.sh/diy/meowkit/build-brief.md",
  "pack": null,
  "archives": [
   {
    "repository": "https://github.com/mingolucky/meowkit-s3-firmware",
    "revision": "2f14a430295279c0dd5a98d160dd40bd75f13a41",
    "url": "https://github.com/mingolucky/meowkit-s3-firmware/archive/2f14a430295279c0dd5a98d160dd40bd75f13a41.zip",
    "includes": "Full repository snapshot; may include other device revisions.",
    "submodules": []
   },
   {
    "repository": "https://github.com/mingolucky/meowkit-s3-docs",
    "revision": "b96f6f213bc021a27ccdb6a6514fa576bec7288f",
    "url": "https://github.com/mingolucky/meowkit-s3-docs/archive/b96f6f213bc021a27ccdb6a6514fa576bec7288f.zip",
    "includes": "Full repository snapshot; may include other device revisions.",
    "submodules": []
   }
  ]
 },
 "nextSteps": [
  "Read the source licences and revision notes; preserve upstream attribution.",
  "Download the pinned design files or repository archives and resolve external libraries, submodules and large-file pointers.",
  "Inspect the circuit, PCB, BOM, enclosure and firmware together; resolve the listed gaps before ordering parts or fabrication.",
  "Follow the upstream assembly and programming instructions. Record changes and bench-test the resulting hardware."
 ]
}