# T-Lora Pager (LILYGO)

> A pager-shaped LoRa messenger with a QWERTY keyboard, 2.33-inch screen, GPS, NFC and a folding antenna, sold in Meshtastic and MeshCore versions.

- **Category:** Radio & mesh
- **Availability:** Listed by maker
- **Price:** US$88.00 (at lilygo.cc), checked 2026-09-17
- **Good for:** Type and read mesh messages on a pocket pager with a real keyboard.
- **You'll need:** Pick the LoRa module and firmware (Meshtastic or MeshCore) that match your mesh.
- **Trade-off:** Battery capacity is not stated.
- **Page:** https://gadgets.sh/devices/lilygo-t-lora-pager/

## Where to buy

| Shop | Status | Link |
|---|---|---|
| LILYGO | Orderable | https://lilygo.cc/products/t-lora-pager?utm_source=gadgets.sh&utm_medium=referral&utm_campaign=lilygo-t-lora-pager&utm_content=api |
| BerryBase | Orderable | https://www.berrybase.de/en/lilygo-t-lora-pager-lora-868-mhz-meshcore-meshtastic-esp32-s3-sx1262-gnss-nfc-sensor-audio?utm_source=gadgets.sh&utm_medium=referral&utm_campaign=lilygo-t-lora-pager&utm_content=api |
| Amazon | Orderable | https://www.amazon.com/dp/B0FGNGQVV2?utm_source=gadgets.sh&utm_medium=referral&utm_campaign=lilygo-t-lora-pager&utm_content=api |

## Blueprint

**Schematics published.** LILYGO publishes a PDF schematic and STL case parts for the T-Lora Pager in its LilyGoLib SDK/firmware repo; no editable PCB source.

### Design files

- schematic: [T-Lora Pager V1.0 schematic (PDF, 25-06-13)](https://github.com/Xinyuan-LilyGO/LilyGoLib/blob/master/schematic/T-Lora%20Pager%20V1.0%20SCH%2025-06-13.pdf) (PDF)
- 3d-model: [T-Lora Pager case parts (STL, 7 files)](https://github.com/Xinyuan-LilyGO/LilyGoLib/tree/master/case/t-lora-pager) (STL)

### Source repositories

- [Xinyuan-LilyGO/LilyGoLib](https://github.com/Xinyuan-LilyGO/LilyGoLib) — sdk, MIT, ★139
- [Xinyuan-LilyGO/documentation](https://github.com/Xinyuan-LilyGO/documentation) — docs, ★3

### Key parts

| Part | Role | Datasheet |
|---|---|---|
| ESP32-S3 | MCU + Wi-Fi/BT | https://www.espressif.com/sites/default/files/documentation/esp32-s3_datasheet_en.pdf |
| LR1121 / SX1262 / CC1101 | LoRa radio (variant-dependent) | https://www.semtech.com/products/wireless-rf/lora-connect/lr1121 |
| u-blox MIA-M10Q | GNSS |  |
| BHI260AP | IMU/sensor hub | https://www.bosch-sensortec.com/products/smart-sensor-systems/bhi260ap/ |

_Notes:_ LilyGoLib is the shared firmware/SDK repo for T-Deck, T-Watch Ultra, T-Lora-Pager and T-Watch-S3(-Plus), but it also happens to hold the hardware schematic PDFs and case STLs used here. The same schematic PDF is also mirrored on the wiki.lilygo.cc doc site.

### Raw source files

Direct links an agent or KiCad can open (the viewer on the page reads the same files).

- 3D model (STL, 0.6 MB): [Part 02](https://raw.githubusercontent.com/Xinyuan-LilyGO/LilyGoLib/master/case/t-lora-pager/02.stl)
- 3D model (STL, 0.2 MB): [Part 01](https://raw.githubusercontent.com/Xinyuan-LilyGO/LilyGoLib/master/case/t-lora-pager/01.stl)
- 3D model (STL, 0.1 MB): [Part 03](https://raw.githubusercontent.com/Xinyuan-LilyGO/LilyGoLib/master/case/t-lora-pager/03.stl)
- 3D model (STL, 0.1 MB): [Part 05](https://raw.githubusercontent.com/Xinyuan-LilyGO/LilyGoLib/master/case/t-lora-pager/05.stl)
- 3D model (STL, 0.0 MB): [Part 07](https://raw.githubusercontent.com/Xinyuan-LilyGO/LilyGoLib/master/case/t-lora-pager/07.stl)

## Specifications

### Core hardware

| | |
|---|---|
| Processor | ESP32-S3 · 16 MB flash · 8 MB PSRAM |
| Display | 2.33″ · 222 × 480 |
| Radios | LoRa 433/868/915 MHz, or LR1121 version covering 868, 915 MHz and 2.4 GHz · 2.4 GHz Wi-Fi · Bluetooth · u-blox MIA-M10Q GPS · RFID/NFC |
| Power | USB-C 5 V charging; battery gauge and charger on board |

### Details from the product page

| | |
|---|---|
| Keyboard and input | QWERTY keyboard, encoder and keypad |
| Sensors | BHI260AP IMU, RTC |
| Audio | ES8311 codec with microphone, speaker and headphone jack |
| Size | 106 × 89 × 23 mm |
| Board functions | RTC, battery charger and gauge, GPIO expander, audio amplifier, TF card |
| Firmware versions | Sold preloaded with Meshtastic or MeshCore |

### Buying

| | |
|---|---|
| Price | US$88.00 on lilygo.cc |
| Availability | In stock on the day of review |

## Documentation

- [Maker product page](https://lilygo.cc/products/t-lora-pager-meshtastic)
- [LILYGO GitHub organisation](https://github.com/Xinyuan-LilyGO)
- [LILYGO FAQ and support](https://lilygo.cc/pages/faqs)

---
Source: gadgets.sh · https://gadgets.sh/devices/lilygo-t-lora-pager/ · JSON: https://gadgets.sh/api/v1/devices/lilygo-t-lora-pager.json