Gadgets.sh

CircuitMess

ByteBoi 2.0

Assemble a handheld and program small games.

DIY consoleProgrammable gamesCircuitBlocks

Bring along
Kit assembly and a computer for CircuitBlocks.
Keep in mind
Match the panel and board revision when choosing firmware.
Source checked · Sep 16, 2026
ByteBoi 2.0
Image creditMaker product image · CircuitMess

(02) Blueprint

What’s published

Schematics published

CircuitMess publishes a schematic PDF and the Arduino library source; no editable PCB/KiCad source or Gerbers were found.

Research notes

Schematic and booklet PDFs both verified 200 on cdn.shopify.com. ByteBoi-Library repo (MIT) is only the Arduino display/driver library, no hardware folder. CircuitMess's own blog post 'Open source schematics and software are here' lists ByteBoi among covered devices but links no files directly beyond these CDN PDFs.

Every link checked 2026-09-27.

Hand this device to your agent. Everything on this page, as clean Markdown and JSON: specs, shops, prices, design files, parts.

Made the ByteBoi 2.0? Put the badge on your README; it links here, with every shop that sells it.

gadgets.sh badge

Specifications

Build and package

4
Project
DIY retro handheld console; roughly 1.5 hours; beginner-friendly, ages 9+
Electronics included
Main board, speaker, LiPo battery, microSD card and pushbuttons
Case included
Acrylic casing, button caps and screws
Assembly tool
Screwdriver included in the 2025 booklet

Hardware in the linked v2.3 drawing

5
Processor
ESP32-WROOM-32-N4
Display
Drawing labels a 2.8-inch TFT with a 12-pin connection
Memory and storage
APS6404L-3SQR-SN PSRAM and a microSD socket appear in the drawing
Battery
600 mAh LiPo with a two-pin JST 1.25 connection
USB and audio
USB-C, CH340C serial interface, TP4054 charger and TC8002D speaker amplifier

Use and programming

6
Games
Preloaded games; create more with CircuitBlocks
Robot control
Can control a separately obtained Wheelson 2.0
Languages
2025 booklet lists CircuitBlocks, Python and Arduino C++
Radio hardware
2025 booklet lists Wi-Fi and Bluetooth; enabled features depend on firmware
Stock recovery
Booklet directs builders to CircuitBlocks Restore Firmware with ByteBoi powered on and the correct serial port selected
Display library
Official source includes ILI9341 and ST7789 targets at 240 × 320 pixels; match the device revision
What still needs checking
  • The library supports multiple display variants; the supplied 2.0 panel controller and exact variant mapping have not been confirmed.
  • MicroSD capacity, USB-cable inclusion, measured runtime, dimensions and weight remain unverified.
  • A revision-matched standalone firmware binary and current Arduino/Python setup instructions have not been verified.
  • The Wheelson control radio protocol and pairing steps are not specified in the reviewed 2.0 product page.
ByteBoi 2.0CircuitMess
Buy

Share this device