# Apex 5 (Honey Honey Team)

> A wireless survey board with multiple radio interfaces.

- **Category:** Wi-Fi & Bluetooth
- **Availability:** Listed by maker
- **Price:** US$79 (at tindie.com), checked 2026-09-15
- **Good for:** Add several radio interfaces to a Flipper Zero.
- **You'll need:** A Flipper Zero and the guide for your board revision.
- **Trade-off:** Choose V1 or V2 instructions; the module has no display.
- **Page:** https://gadgets.sh/devices/apex-5/

## Where to buy

| Shop | Status | Link |
|---|---|---|
| Tindie | Orderable | https://www.tindie.com/products/honeyhoneytrading/esp32-marauder-5g-apex-5-module-for-flipper/?utm_source=gadgets.sh&utm_medium=referral&utm_campaign=apex-5&utm_content=api |
| Honey Honey Team | Source repository | https://github.com/HoneyHoneyTeam/ESP32-Marauder-5G-Apex-5-Module---For-Flipper-Zero?utm_source=gadgets.sh&utm_medium=referral&utm_campaign=apex-5&utm_content=api |

## Blueprint

**Closed design.** Only a user manual with photos is published on GitHub; no schematic, PCB, or BOM files exist for the Apex 5 module.

### Source repositories

- [HoneyHoneyTeam/ESP32-Marauder-5G-Apex-5-Module---For-Flipper-Zero](https://github.com/HoneyHoneyTeam/ESP32-Marauder-5G-Apex-5-Module---For-Flipper-Zero) — docs, Apache-2.0, ★27

### Key parts

| Part | Role | Datasheet |
|---|---|---|
| ESP32-C5 | Wi-Fi 2.4/5 GHz MCU | https://www.espressif.com/sites/default/files/documentation/esp32-c5_datasheet_en.pdf |
| TI CC1101 | Sub-GHz transceiver (dual, 433/868 MHz) | https://www.ti.com/lit/ds/symlink/cc1101.pdf |

_Notes:_ Checked the full repo tree: only Assets/images, README.md (a user manual), and LICENSE exist — no schematic/PCB/gerber/BOM files. Firmware is community ESP32Marauder (justcallmekoko), excluded per instructions. NRF24 chipset is mentioned by the maker but exact part number/manufacturer page not confirmed, so its datasheet was omitted rather than guessed.

## Specifications

### Hardware

| | |
|---|---|
| Wi-Fi platform | ESP32-C5; 2.4 GHz and 5 GHz |
| Memory | 8 MB RAM and 8 MB flash, maker specification |
| Sub-GHz | Two CC1101 modules for 433 and 868 MHz configurations |
| Additional radio | NRF24 with external antenna |
| Positioning | GPS module with external antenna |
| Storage | SDXC for supported capture/log workflows; compatible Flipper SD workflows also documented |

### Controls & package

| | |
|---|---|
| Radio selection | Button A selects CC1101 module; LEDs indicate selection |
| Updates | USB-C and BOOT button B |
| Included | Board, two-piece black/white printed case, five antennas and quick-start guide |

### Revision compatibility

| | |
|---|---|
| V1 UART | ESP32 on extra pins 15/16; GPS on default pins 13/14 |
| V2 UART | ESP32 on default pins 13/14; GPS on extra pins 15/16 |
| SPI | CC1101 uses default pin 4; NRF24 uses extra pin 7 in the documented wiring |
| Wardriving | Maker says V1 does not support Marauder wardriving; V2 does |
| Firmware reference | Manual validates Momentum MNTM-012, dated 30 April 2025 |
| Switching radios | Select the CC1101 module before opening the relevant app, per maker instructions |

## Documentation

- [Maker specifications and product details](https://github.com/HoneyHoneyTeam/ESP32-Marauder-5G-Apex-5-Module---For-Flipper-Zero)
- [Current Marauder firmware releases](https://github.com/justcallmekoko/ESP32Marauder/releases)

---
Source: gadgets.sh · https://gadgets.sh/devices/apex-5/ · JSON: https://gadgets.sh/api/v1/devices/apex-5.json